Nitrile Blue
Powder Free
Examination Gloves
Utouch Nitrile Blue Powder Free Examination Gloves are high performing 5mil thick powder-free blue colored ambidextrous gloves that are chemical resistant under EN-374 and intended for use in medical field to: protect patient and user from crosscontamination, conducting medical examinations, diagnostic and therapeutic procedures and for handling medical contaminated material.
Key Features
Utouch Nitrile Blue Powder Free Examination Gloves are high performing 5mil thick powder-free blue colored ambidextrous gloves that are intended for use in medical field to: protect patient and user from crosscontamination, conducting medical examinations, diagnostic and therapeutic procedures and for handling medical contaminated material. This examination glove product conforms under International, American and European standards specific to: ASTM D6319, EN374 and EN455.
- Nitrile Blue
- Powder Free
- Examination Gloves
- Antibacterial
Our All Certificates
| 5 Mil Thickness | Mils | Mm |
|---|---|---|
| Palm Thickness | 5.0 min | 0.13 min |
| Finger Thickness | 5.0 min | 0.13 min |
Sizes Available
- Small
- Medium
- Large
- X-Large
Protective against dangerous chemicals and microorganisms
These gloves are 100% Nitrile (Acryonite), and are designed to provide an excellent biological barrier and good res istance to bacteria, fungi, viruses and a variety of chemicals found in typical medical and industrial environments. It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may differ from the type test depending on the temperature, abrasion anddegradation. When used, protective gloves may provide less resistance to the dangerous chemical due to changes in physical properties. Movements, snagging, rubbing, degradation caused by the chemical contact etc. may reduce the actual use time significantly. For corrosive chemicals, degradation can be the most important factor to consider in selection of chemical resistant gloves.
*The range of chemicals tested and Type (A/B/C) under EN ISO 374-1:2016 may vary in for this product in different markets. For further information on chemical resistance, please contact us on info@utouchgloves.com.
Approved Standards & Conformity
These gloves have been tested and approved in accordance with the requirements of International, American and European standards specific to:
MDD classification & compliance: Council Directive 93/42/EEC
Gloves are classified as class I Medical Device as per Annex VIII of the Medical Device Regulation 2017/745 and comply to standards: EN 455-1:2000, EN 455-2:2015, EN 455-3:2015, EN 455-4:2009, EN ISO 15223-1:2016, EN 1041:2008+A1:2013.
EN 455-1:2000
Medical gloves for single use
Pt. 1: Requirements and testing for freedom from holes
EN 455-2:2015
Medical gloves for single use
Pt. 2: Requirements and testing for physical properties
EN 455-3:2015
Medical gloves for single use
Pt. 3: Requirements and testing for biological evaluation
EN 455-4:2009
Specification for nitrile examination gloves for medical application
EN ISO 15223-1:2016
Medical gloves for single use
EN 1041:2008
Medical gloves for single use
PPE classification & compliance: PPE Directive (EU) 2016/425 (formerly 89/686/EEC)
Gloves are category III Personal Protective Equipment as per Annex I of the Regulation 2016/425 and comply to standards: EN 420:2003+A1:2009, EN ISO 374-1:2016, EN 374-2:2014, EN 16523-1:2015, EN 374-4:2013, EN ISO 374-5:2016.
EN 16523-1:2015
Determination of material resistance to permeation by chemicals
Pt. 1: Permeation by liquid chemical under conditions of continuous contact
EN ISO 374-5:2016
Protective gloves against dangerous chemicals and microorganisms
Pt. 5: Terminology and performance requirements for microorganisms risks
EN ISO 374-1:2016
Protective gloves against dangerous chemicals and microorganisms
Pt. 1: Terminology and performance requirements for chemical risks
EN 374-2:2014
Protective gloves against dangerous chemicals and microorganisms
Pt. 2: Determination of resistance to penetration
EN 374-4:2013
Protective gloves against chemicals and micro-organisms
Pt. 4: Determination of resistance to degradation by chemicals
EN 420:2003
Protective gloves - general requirements and test methods
ASTM-D6319: Standard Specification for Nitrile Examination Gloves for Medical Application
Manufactured in FDA-registered facilities utilizing an FDA-registered 510(k) formulation. Meets US government 21-CFR specifications and the current specifications listed under the ASTM specification D6319, Standard for Nitrile Gloves for Medical Application; acceptable for use in food and pharmaceutical applications..
ASTM D 6319
Specification for nitrile examination gloves for medical application
FDA-REGISTERED 510(K)
Specification for nitrile examination gloves for medical application